Duplex 2205 suppliers

Duplex 2205 stainless steel price Per Kg in UAE

2205 Duplex price per pound is usually higher than the ordinary ferritic steel types but is lower than high titanium content alloys. Duplex Stainless Steel 2205 Products are very much stress corrosion cracking resistant. With this quality, they can be applied in high pressure environments. Duplex Steel 2205 pressure vessel material can be used in marine environments and the Duplex Alloy 2205 for onshore industry is a common choice.

Duplex 2205 Stainless Steel grades have high yield strength and a are characterized by their two phase chromium, nickel and molybdenum alloy. 2205 Stainless Steel is a result of continuous modifications over the past and was standardized in 1996. It is very strong in the rage of -50 degrees to 300 degrees Celsius temperature. This material takes precipitation above this temperature range and becomes brittle below the range. Therefore it cannot be applied in cryogenic conditions or at melting point temperatures.

Duplex material 2205 apart from the low range of temperature resistance is much resistant to chloride stress corrosion cracking. This is often used as replacement to austenitic grade steels in marine and corrosion high environments. 2205 Duplex stainless steel raw material is a composition of 22% chromium, 6% nickel, 3% molybdenum with 50-50 ferritic and austenitic steel phases. Applications include the oil and gas industry, paper machineries, pulp and paper digesters, transport, storage, chemical processing, liquor tanks and processing equipment.

Avesta 2205 Material, 2205 Stainless Steel suppliers, Duplex 2205 F51 products suppliers, 2205 duplex ss material stockist in Dubai

Duplex 2205 Suppliers

Duplex 2205 Stainless Steel Material

2205 Duplex stainless steel

Table of Content

What is 2205 Duplex Stainless Steel?
2205 Stainless Steel temperature limit
Duplex 2205 specification
Alloy 2205 ASTM grade
Inventory of Duplex 2205 Steel
Duplex 2205 equivalent
Characteristics of Duplex 2205
Duplex 2205 UNS number
22 Cr Steel mechanical properties
Duplex 2205 composition
2205 Stainless Steel applications
Duplex 2205 price per kg
1.4462 saf 2205 pren number

Distributor of Duplex 2205, Stockist of 2205 Duplex stainless steel in Dubai. 2205 Stainless Steel dealerin UAE. Buy from Duplex 2205 Stainless Steel Material dealers in Dubai, UAE

Dealer and Stocking Distributor of

What is 2205 Duplex Stainless Steel?

Duplex 2205 Stainless Steel is a specification of duplex grade stainless steel types. Duplex 2205 Distributors sell this duplex grade steel in many forms and shapes. 2205 Duplex SS material is used where good corrosion resistance and strength is needed. Duplex 2205 Suppliers sell this material at different prices based on shapes, sizes and amounts purchased. Duplex 2205 Price Per Kg can differ from supplier to supplier and from country to country.

Duplex 2205 Suppliers

2205 Stainless Steel Temperature Limit

Temperature Rating: 1020-1100°C/ 1868-2012°F

Duplex 2205 Specification

Properties of material 2205

ASTM A 182, A 240, A 276, A 789, A 790, A 815
UNS S31803, S32205
NACE MR0175

2205 stainless steel grades	Industry Specifications	UNS
Duplex 2205 22Cr	ASME SA-182 (F60), SA-240, SA-798, SA-790, SA-815 ASTM A182 (F60), A240, A276, A479, A480, A798, A790, A815, A928, A988 SAE J405	UNS S32205
Duplex 2205 22Cr	ASME SA-182 (F51), SA-240, SA-798, SA-790, SA-815 ASTM A182 (F51),A240, A276, A479, A789, A790, A815, A928, A988 SAE J405	UNS S31803

We are the largest Duplex Stainless Steel suppliers in UAE & have ready stock of above specification duplex products. Check below Duplex Stainless Steel Grades, Material Compatibility, Properties, Material Hardness and available stock list in UAE.

Alloy 2205 ASTM Grade

Check below Duplex 2205 ASTM Grade in our stock

Grade	2205 Seamless and welded tube and pipe	2205 Plate, sheet and strip	2205 Bar	2205 Forgings	2205 Flanges	2205 Fittings
Duplex 2205 / Avesta 2205 / Saf 2205 Duplex Stainless Steel	ASTM A789; A790 NFA 49-217	ASTM A240 EN 10088-2	ASTM A276 ASTM A479 EN 10088-3	ASTM A182	ASTM A182	ASTM A182, ASTM A815

Duplex 2205 equivalent

Duplex Stainless Steel Grade 2205	Alloy 2205 Uns Number	Old British		Euronorm		Swedish SS	Japanese JIS
		BS	En	No	Name
Duplex 2205 / Avesta 2205	S31803 / S32205	318S13	-	1.4462	X2CrNiMoN22-5-3	2377	SUS 329J3L

Characteristics of Duplex 2205

Resistance to crevice corrosion & chloride pitting
High resistance to chloride stress corrosion cracking
Good sulfide stress corrosion resistance
Good general corrosion resistance
Good workability and weldability
High Strength

Duplex 2205 UNS number

Duplex Alloy 2205	UNS S31803, UNS S32205

22 Cr Steel Mechanical Properties

Ultimate Tensile Strength, ksi Minimum	Hardness Max.	.2% Yield Strength, ksi Minimum
95	31 Rockwell C	65

Physical Properties	Inox Value
Duplex Type 2205 Specific Heat Capacity at 212°F	0.119 Btu/lb/°F
Avesta 2205 Poisson’s Ratio	0.3
Thermal Expansion / Thermal Conductivity at 212°F	8.4 Btu/hr-ft-°F
Density:	0.278 lb/in3
Werkstoff 1.4462 Elastic Modulus at 72°F	29 x 10 psi
Melting Range:	2525-2630°F

Duplex 2205 Composition

Cr	Ni	Mo	C	N	Mn	Si	P	S	Fe
22.0-23.0	4.50-6.50	3.00-3.50	.030 Max	0.14-0.20	2.00 Max	1.00 Max	.030 Max	.020 Max	Balance

Check complete details of 2205 Stainless Steel Material Properties, Heat Treatment, Density, Material Grade Applications, Fatigue Strength, Annealing, Alloy Temperature Limit, Hardness, Weight Calculator, Machinability, Impact Test, Yield Stress and Price Per Kg.

2205 Stainless Steel Applications

2205 Stainless Steel grades are used for many industries, check below 2205 Stainless Steel Applications & uses:

Chemical Process
Pharmaceutical
Geothermal
Petrochemical
Sea Water
Oil & Gas

Biomass
Mining
Utilities
Nuclear Power
Solar Power
Storage tanks

Water Desalination
Reinforcement bars
Building and construction
LNG (Liquefied Natural Gas)
Water piping

Duplex 2205 Price Per Kg

Duplex Stainless Steel 2205 price in UAE	Shape of	Duplex ss 2205 price per kg in UAE
2205 Stainless Steel price per kg in UAE	2205 Plate	$ 4-5
2205 stainless steel price per kg in UAE	2205 Sheet	$ 4-5

Please note above is just approximate Price of Duplex 2205 in Dubai & Chennai. Please contact SME for Free Quote and latest Duplex 2205 price list in UAE.

2205 duplex ss material supplier in Dubai. Duplex SS 2205 in stock for sale by Duplex 2205 stockist. Check Duplex 2205 Alloy stock in UAE & Duplex 2205 Steel price in Dubai, UAE

1.4462 saf 2205 Pren Number

Avesta 2205 Grade	PREN	Type
1.4462	30.8-38.1	SAF 2205

Ready Inventory of Duplex 2205

Alloy 2205 Natural Gas Piping Material	22cr Underground Piping Material
Alloy 2205 Stainless Steel Fuel Piping Material	Alloy 2205 F51 Material
SS 2205 Fuel Oil Piping Material	Alloy 2205 Grade Products
2205 Fuel Gas Piping Material	Stainless Steel Grade 2205 Fuel Piping Material
2205 Steel Fitting Piping Material	Inox Alloy 2205 Fuel Oil Piping Material
Avesta 2205 Piping Material	Alloy 2205 AISI Tube Material
Alloy 2205 Steel Material	Alloy 2205 Alloy Tubing Material
Alloy 2205 Alloy Products	Saf 2205 Stainless Steel Piping Material
2205 Stainless Steel Gas Piping Material	Lean Alloy 2205 Fuel Gas Piping Material
Alloy 2205 Oil And Gas Piping Material	2205 1.4462 Gas Line Piping Material
Stainless Steel 2205 Power Plant Piping Material	Duplex2205 Grade F51 Industrial Piping Material
22 Cr Steel Sanitary Piping Material	Alloy 2205 F60 Oil And Gas Piping Material
22 Cr Alloy Underground Gas Piping Material	1.4462 Alloy 2205 Power Plant Piping Material
2205 Stainless Steel Gas Line Piping Material	Type 2205 Fitting Piping Material
2205 SS Industrial Piping Material	Alloy 2205 Werkstoff 1.4462 Gas Piping Material
22Cr Stainless Steel Tubing Material	1.4462 saf 2205 Tube Material
22Cr Stainless Products	Saf 2205 Stainless Steel Tube Material
Stainless Steel 22 cr Fitting Piping Material	22Cr Steel Material