1.4462 Material

SS 1.4462 Bolts & Duplex 1.4462 Bar supplier

1.4462 Duplex Plate is one of the most used stainless steel alloys today. It has a middle range of mechanical properties of stainless steel alloys which makes it used in many applications. Duplex is a grade of steel which contains austenite and ferrite components in 50-50 combinations. Duplex grade is extremely corrosion resistant and pitting resistant. Duplex 1.4462 Sheet is very tough enough ordinary ferritic stainless steel sheets. 1.4462 Duplex Sheet reaches strengths double that of austenitic stainless steels in some use cases. Duplex Steel 1.4462 Plate have higher corrosion resistance but have lower stress corrosion resistance compared to ferritic steel types.

Distributor of 1.4462 F51 Plate Sheet, SS 1.4462 Tube,1.4462 Hollow Bar, Grade 1.4462 Flange, 1.4462 Fittings, SS 1.4462 Nut Bolt suppliers in UAE

Distributor & dealer of Stainless Grade 1.4462 Material in UAE, SS Grade 1.4462 products stockist, buy 1.4462 Saf 2205 material at best price in UAE

Please note above is just approximate Price of 1.4462 material in Dubai. Please contact 1.4462 Grade material distributors for best price in UAE. Before you buy compare our price with other 1.4462 Duplex products suppliers in UAE & China. We do not stock 1.4462 China material.

1.4462 Duplex Steel material suppliers in Dubai. Duplex 1.4462 products stockist in UAE, wide range of 1.4462 Steel equivalent material & 1.4462 Duplex Stainless Steel material

Duplex Plate 1.4462 material is magnetic. Most common austenitic type steels do not remain magnetic after the solution heating process. An easy differentiation of duplex and austenitic steel types is the magnetism of the Duplex Stainless Steel 1.4462 Material. 1.4462 Grade Plate material is also hardenable unlike most other stainless steel alloys. 1.4462 Duplex Steel Foil can be used in applications where the stress is low but the corrosion is high. Marine water and high oxidizing chemical environments are examples. Since the microstructure of 1.4462 Duplex Stainless Steel Coil consists both the ferritic and austenitic steel phases, it provides benefits of both types. Also, the presence of both phases in the microstructure brings some disadvantages from both types. 1.4462 Stainless Steel Hot Rolled Plate adds up some strength as it is processed in high heat before molding into the desired shape.

1.4462 Steel Shim Sheets are usually abundant in the market because they are one of the most commonly used types of metal shims. Stainless Steel 1.4462 Shim Stock in needed quantities is available from Duplex Steel & Engineering Company (DSEC) for supply any time. Duplex SS 1.4462 Polished Cold Drawn Plate is shaped up in room temperature and is easy to manipulate. The cold rolled and polished plates are usually used in low risk and aesthetic purposes such as kitchen appliances and furniture.

1.4462 Material Properties

1.4462 Steel Grade Physical Properties	Value
1.4462 Stainless Steel Density:	0.278 lb/in3
1.4462 Super Duplex Melting Range:	2525-2630°F
Specific Heat Capacity at 212°F	0.119 Btu/lb/°F
1.4462 Duplex Thermal Expansion / Duplex 2205 Thermal Conductivity at 212°F	8.4 Btu/hr-ft-°F
Duplex 1.4462 Poisson’s Ratio	0.3
Elastic Modulus at 72°F	29 x 10 psi
1.4462 Magnetic Properties	Magnetic

Spec: EN 10088-2:2005

Sheet - Up to 8mm thick

Mechanical Property	Value
Proof Stress	500 Min MPa
Tensile Strength	700 to 950 MPa
Elongation A50 mm	20 Min %

Spec: EN 10088-2:2005

Plate - over 8mm to 13.5mm Thick

Mechanical Property	Value
Proof Stress	460 Min MPa
Tensile Strength	700 to 950 MPa
Elongation A50 mm	25 Min %

Spec: EN 10088-2:2005

Plate - Over 13.5mm to 75mm Thick

Mechanical Property	Value
Proof Stress	460 Min MPa
Tensile Strength	640 to 840 MPa
Elongation A50 mm	25 Min %

en 1.4462 yield strength : Tensile Strength 700 to 950 MPa

2205 Grade 1.4462 Equivalent is similar to but may not be a direct equivalent:

1.4462 / S31803 / F51 / X2CrNiMoN22-5-3 (1.4462 Vs 2205)

W.Nr. 1.4462	BS 318S13	SIS 2377
UNS S31803	AFNOR Z3CND 22-05 Az	JIS SUS329J3L
UNS S32205	DIN 17740 1.4462	ASTM / ASME F51
X2CrNiMoN22-5-3

1.4462 Material Equivalent specification : By using 1.4462 (UNS S31803/ S32205 – F51 – SS2377) you get a stainless duplex steel that has high resistance to various types of corrosion

Steel Grade 1.4462 Equivalent aisi (din 1.4462 equivalent astm) : Duplex 1.4462 belongs to the family of duplex stainless steels. This steel is characterised by its excellent combination of corrosion resistance, comparable to that of the austenitic grade 1.4404, and strength, about 150% higher than that of the 1.4404 austenitic grades.

1.4462 Equivalent ASTM Grade : EN 1.4462 / AISI S31803 (2205). Euronorm, Nom. AISI / ASTM / UNS. 1.4462, X2CrNiMoN22-5-3, S31803 (2205)

1.4462 material equivalent or 1.4462 material equivalent astm : The steel grade 1.4462 (also called UNS S31803/ S32205 , F51 and SS2377) is a stainless acid resistant duplex steel with high strength and extremely good corrosion properties.

1.4462 Rockwell Hardness

Ultimate Grade 1.4462 Stainless Steel Tensile Strength, ksi Minimum	.2% SS Grade 1.4462 Yield Strength, ksi Minimum	Duplex 1.4462 Hardness Max.
95	65	31 Rockwell C

Composition of 1.4462

Spec: EN 10088-2:2005

1.4462 Composition

1.4462 Duplex Chemical Composition Element	Duplex 1.4462 Material % Present
Carbon (C)	0.0 - 0.03
Chromium (Cr)	21.00 - 23.00
Sulphur (S)	0.0 - 0.02
Nickel (Ni)	4.50 - 6.50
Nitrogen (N)	0.10 - 0.22
Manganese (Mn)	0.0 - 2.00
Silicon (Si)	0.0 - 1.00
Phosphorous (P)	0.0 - 0.03
Molybdenum (Mo)	2.50 - 3.50
Iron (Fe)	Balance

Duplex 1.4462 Pren: 30.8-38.1
1.4462 Pre 35

0.278 lb/in3

Distributor of hot rolled & cold rolled Duplex 1.4462 (2205) Bar in UAE.

1.4462 Bar - Up to 160mm Dia / Thickness

Mechanical Property	Value
Proof Stress	450 Min MPa
Tensile Strength	650 to 880 MPa
Elongation A50 mm	25 Min %
Hardness Brinell	270 Max HB

Duplex Steel 1.4462 Material have excellent weldability. Any standard welding method can be used for SS 1.4462 Tube, Grade 1.4462 Pipe or 1.4462 Duplex 2205 Flange material e.g. Shielded metal arc welding, Gas tungsten arc welding, Plasma arc welding and Submerged-arc welding. But the Welding of 1.4462 is not easy compare to the austenitic grades but low thermal expansion in duplex grades reduces distortion and residual stresses after welding. 2209 is mainly used to weld duplex stainless steel such as 2205 (UNS Number S31803).  Duplex Steel 1.4462 has good weldability and can be welded by most of the common welding methods You can also use Avesta Welding 2205 when you weld both cold and hot formed or something similar as filler metal. Steel Grade 1.4462 Machining shall be performed with high-speed tools.

Grade 1.4462 Heat Treatment : 1.4462 Duplex Stainless Steel can not be hardened by heat treatment. But 1.4462 Steel can be work hardened. Solution treatment or annealing for En 1.4462 are suotable by rapid cooling after heating to around 1100°C.

Duplex 1.4462 Machinability

Although its difficult to machining 1.4462 Material Grade due to, the high 1.4462 Fatigue Strength. For example, machining of 2205 is around 20% slower compare to grade 304.

2205 1.4462 Corrosion Resistance (1.4462 Chemical Resistance)

1.4462 Duplex Steel material are known for high corrosion resistant. 1.4462 Material have excellent resistance to intergranular corrosion. 1.4462 Bar & 1.4462 Fasteners are suitable to use in chloride and sulphide environments, Duplex 1.4462 exhibit very high resistance to stress corrosion cracking.

• 1.4462 Tube
• 1.4462 Tubing
• Stainless Grade 1.4462 Seamless Tubing
• En 10088 Grade 1.4462 Welded Tubing
• SS Grade 1.4462 Seamless Tube
• 1.4462 Steel Grade Welded Tube
• 1.4462 Stainless Steel Instrument Tubing
• 1.4462 Super Duplex Heat Exchanger Tube
• 1.4462 Saf 2205 Round Tube
• Grade 1.4462 Stainless Steel Square Tube

Duplex 1.4462 - UNS S31803 - F51 Sheets/ Plates hot rolled Finish 1
Sizes:
Thickness 3 mm - 100 mm
Width 1000 / 1250 / 1500 / 2000 / 2500 mm
Length 2000 / 2500 / 3000 / 6000 / 6000 tot max. 8000 mm

Duplex 1.4462 - UNS S31803 - F51 sheets
Plates plasma cutting
Water-jet cutting
Laser-cutting
Sawn cuttings

Duplex 1.4462 - UNS S31803 - F51 Seamless tubes/ pipes acc. to ASTM/ ASME A/SA 789/790 EN 10216-5 NACE MR 0175 long 5-7 mtr
Sizes: 21,30 x 2,60 mm - 232,90 x 9,52 mm

• ISO 1.4462 Seamless Pipe
• 1.4462 Grade Welded Pipe
• 1.4462 Duplex Pipe
• 1.4462 Duplex Steel Pipe
• Duplex 1.4462 Plain End Pipe
• 1.4462 En 10088-3 Beveled Pipe
• 1.4462 F51 Treaded Pipe
• 1.4462 Duplex Stainless Steel Pipe material
• 1.4462 Steel CDW Pipe
• En 1.4462 Thick Wall Pipe
• Duplex Steel 1.4462 Round Pipe
• 1.4462 Stainless Rectangular Pipe